WSPH5001 Wastewater pH Sensor

Home|Water Quality Monitoring System|pH|WSPH5001 Wastewater pH Sensor

WSPH5001 Wastewater pH Sensor

Feature

  • It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is no need of the jacket, thus saving the installation cost.
  • The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20 meters free of interference.
  • Reference electrode with silver ions Ag/AgCL
  • There is no need for refilling of electrolyte, therefore maintenance is low.
  • High accuracy, fast response and good repeatability.
  • Proper operation shall make service life longer.
  • It can be installed in the reaction tank or pipe laterally or vertically.
  • Profile – 3in1 Electrode (Integrating temperature compensation and solution grounding)

Application

  • water, sewages, and water treatment
  • any water bodies with common conditions
Contact Us

 

Catalogue
Category:

Description

WSPH5001 is a combination pH electrode, sensing material and cover designed using popular materials to decrease cost while maintaining performance. It is integrated with a measure and reference electrode and has an in-built temperature sensor for compensation.

The pH sensor detects the concentration of H+ ions present in the water body and converts this electrochemical current into a voltage. This is then converted to pH readings via a pH meter.

Go to Top